Fruit harvesting technology

The fruit machine glean OB 80 is manufactured and sold for 15 years with great success

The Honda engine with 6.5 hp allowing a speed of up to seven km / h Since 2002 the OB80 as an option a 11 hp engine and a continuously variable hydraulic drive with differential lock, which is especially helpful in extreme slopes. The device has a mechanical steering.

obstauflese_ob80

The easy-to-use device designed unit has a very good Aufsammelleistung of up to 99% depending on soil. The rotor made of rubber, the speed is infinitely variable, the fruit absorbs and transports it into the two wide throw used plastic baskets, which are taken to the rear. Through the use of sophisticated components, the device is very robust and guarantees many years of reliable standby.

The acquisition of this fruit glean machine is especially for the machinery ring, but also for farmers with medium-sized meadow orchards.

fruit: apples, pears, walnuts, hazelnuts, chestnuts, plums, citrus fruits, etc.

see video  [youtube]https://www.youtube.com/watch?v=Ymv86Mg4Ocg[/youtube]

 

Advantages

  • Compact desing and big streering angle for maximum manouverability
  • Can be used in plants and on fruit meadows. Plant rotor with triangle wings (registered desing) and optimized ground adjustment are reaching pickup rates higher than 99%
  • 100% seperation of fruit from grass and leaves
  • Easy access to fuit baskets, stored 700 mm high
  • Bracket for additional fruit baskets
  • The plant rotor is able to rotate with infinitely variable speed
  • Metal sheets are phosphate-treated and powder-coated. This gives much better mechanical and UV stability compared to conventional paints
  • The plant rotor can be exactly adjusted to the ground by skid. The system follows every ground automatically
  • Drive belts are spring extensioned are maintanance free. This system can be compared to hydraulic drives but it is much cheaper
  • Front wheel steering is connected to the rhs handle. Gear linkage for reduced steering froces allows young people and woman to use the machine even on inclines
  • Ergonomically arranged controls, safety stop for drive train.
  • Our machines are reaching highest pickup rates (nearly 100%) without damaging any fruit. It dosn´t matter if there is more or less fruit available. Fruits will be cleaned during pickup process
  • Complete fruit basket capacity is utilised
  • Possible grass lenght for best pickup results: 5-25 cm
  • Powerful engine and low noise level (only 30% engine load)
  • Tractor drawbar for transport (not for hydrostatic transxle).
  • Pneumatic control replacing bowden wires (option for hydrostatic transaxle only)

Accessories

  • Operating hours counter
  • Continuously driven plantation rotor with flow regulation
  • Differential lock (only for hydrostatic transmission for up to 45 degrees)
  • Pneumatic actuation instead of Bowden cables (for hydrostatic transmission)

 

 

Technical data

Working width: 800mm bis 1600mm
Engine: 6,5 HP, optional 11 HP Honda OHV gasoline single cylinder engine electrinic ignition
Drive train: 5 forward speeds one reverse speed, mechanical differential or hydrostatic transaxle
Transmission: belt driving pickup system, automatic belt extensioners
Incline capability unrestricted
Pickup adjustment: height adjustment with fixable spindle at front wheel
Fruit basket volume:: 2 x 35 ltr.
Pickup capacity: 2,5 or 4 tons/hour
Length: 2250 mm/ 2930 mm with tractor drawbar for
Transport: Width: 1520 mm
Height: 980 mm
Weight: Approx. 180 kg

 

Cambio de paradigma en la compra de fruta! Primero 2 Maquinas de FRUMACO AMERICA / Feucht Obsttechnik en Rio Negro / Argentina

La empresa Jugos S.A. y, presentó la maquina que recolecta fruta del piso, Daniel Cecive, directivo de la empresa Jugos S.A., le manifestó a Agrovalle que es un proyecto de la firma Jugos en colaboración de la firma Podlesh S.A, en un proyecto de diversificar la producción donde se buscaron alternativas en obtener productos de frutas del suelo y se encontraron con un fenómeno que es inminente que es la disminución de la fruta que se destina a industria , como dato, Cecive, manifestó que en el año 2013 quedaron en campo 120 mil toneladas de fruta que no se recolectaron, y buscaron que esa fruta ingrese en el flujo económico del valle.

En otro tramo, Cecive, expreso que: “Se quiere cambiar el paradigma en la compra de fruta, intentamos no pagarle al productor un precio con el cual el tenga que hacer un calculo si conviene, o no recolectar la fruta para industria, sino que el productor tiene que dedicarse a cosechar la fruta para fresco y nosotros prestaríamos un servicio con personal propio.

fuente Agrovalle

 

20140416_100721_resized20140416_101156_resized maquina-1

Model OE4 – This harvester is based on a principle of single system. The vibration and collection function is combined in one side machine next to the tree.

In this type of machine a method of continuous harvest is used, i.e., trees are harvested continuously without pauses. For this purpose, the machine is equipped with a shaker which operates continuously. A special electro-hydraulic mechanism controls the process.

Thus, after this operation, fruits do not fall to the ground, as an umbrella over the lines of trees will help with the process. From the side of the machine and from umbrella, fruits are obtained through a special sealing built on a central conveyor belt. This is designed such that, despite the density function, is still providing a continuous harvest operation.

On the downstream conveyor, the elevator and the purification phase, fruits will be transported to an adjacent row powered container. The harvester has a chassis with high and controlled lateral suspension level, in such a way that it is able to adapt to more difficult areas. The operator can perform and supervise from cabin all machine functions.

All work processes of the machine are performed electro-hydraulically. Modification of the collection during transport will also be electro-hydraulic and will only take about 2 minutes. The harvester is authorized for road use.

[youtube]https://www.youtube.com/watch?v=xBBkW6C_KOA[/youtube]

TECHNICAL INFORMATION:

Machine System: Single system

Self-propelled harvester Vehicle in parallel for the harvesting of the crops

Operation: One man

Harvesting methods: Continuous work shaker with a “Shake and Catch” method

Crop Transportation: Parallel transfer of the crop from the delivery system in a vehicle moving in adjacent row

Crop Yields: Up to 7 trees / min in T01

Facilities design: Distance between the rows > 5, 0 m

Tree separation > 1.8 m

Trunk diameter 80 mm until 200 mm

Trunk Height > 0.7 m

Crown height < 4.0 m (< 5.0 m possible)

Crown width < 3.2 m

Fruits: Apples, Pears, other fruits Cherries Plums

Cleaning of the harvest: Wood and leaves separation

Road transport : DEKRA type, suitable and tested

 

OE4 Prospekt Erläuterung

Picking the fruit machine OB 50 and OB 70 is the smallest and cheapest fruit picking machine worldwide.

The Honda engine with 5.5 horsepower allows speeds of up to 7 km/h. This easy-to-use machine has a very good collective performance and up to 99% of the soil/dust is not collected. The rotor made of rubber the speed is variable, takes on the fruit and transport it in the widely used plastic basket, which can be replaced by empty ones stored on the machine.

watch video

[youtube]https://www.youtube.com/watch?v=XN3rd_s8Ryo[/youtube]

Advantages

  • Very maneuverable and easy, with short, compact design
  • Very good cleaning of the fruit, leaves and grass
  • The steel parts are coated in plastic. Compared to conventional coatings it is much more professional and UV resistant optimum grass length between 15-25 cm in length grass
  • Our machines achieve the highest percent of pickups (almost 100% without damaging the fruit by gentle absorption of the rubber lip at the minimum and maximum fruit density. During the end call the fruit is cleaned of leaves and grass
  • The device is easy to use

Technical data

Working wide: 500mm / 700mm
Engine: 5,5 PS Honda-engine
Drive train: 3 forward speeds one reverse speed, mechanical differential
Length: 900 mm / 1100 mm
Wide: 1200mm / 1450mm
High: 1210 mm
Tires: behind 3.00 – 4 AS Profil, front 16×6.50-8
Weight: 65 kg / 95 kg
Pick up adjustment: at front wheel with rings
Pickup capacity: up to 1,5 Tonnen/h / 2,5 Tonnen/h
Users: Private persons, communities, professionals
Fruit kinds: Apple, pear, walnuts, hazelnuts, citrus fruits

 

Seite 1 von 3123